Description
This product is sold through our reseller channel including Industrial ARM Works (US), Watterrott (Germany)
.Until now, there have been few options to protect the popular FriendlyARM mini2440 and LCD. Based on the proven design of the Chameleon 1 Universal enclosure system, the Chameleon 1 for mini2440 is a complete enclosure system designed specifically to house the mini2440 and its companion 3.5" LCD.
This enclosure works like the Chameleon 1 Basic and Chameleon 1 Universal, but is tailored to just the FriendlyARM mini2440.
One of the nice things about this system is you can develop with the board mounted and with the lid off, but still have a fully functioning, securely attached LCD. The LCD won't be kicking around loose on your bench.
You have full access to the board and LCD even when it's mounted. Both are secure while you're working on them and your LCD is mounted securely in the lid and off the bench during debug.
Once you get your system running the way you want, just fit the lid over the base, fasten it with the included self-tapping Tek screws, and you have a bomber enclosure for the sweet mini2440.
Components included with the Chameleon 1 for mini2440 with LCD:
- Chameleon 1 Baseplate with mini2440 template for mounting holes
- Chameleon 1 lid with LCD cutout for the FriendlyARM 3.5" LCD
- Faceplate custom designed for the mini2440
- Hardware package including assorted common 4-40 standoffs, screws, and nuts
- (4) 4-40 socket head cap screws to secure the LCD to the lid
- Self-tapping screws to securely fasten the lid, baseplate, and faceplates.
The mini2440 and LCD are sold separately.
While the Chameleon 1 is a nice, compact enclosure, there's still room for your other electronics inside.
Chameleon 1 has the following dimensions:
Lid:
- Length – 6.15”
- Width - 5.00”
- Height – 2.00”
Base Plate:
- Length – 6.15”
- Width - 4.90”
- Height – 0.40”
Many general purpose enclosures require the purchase of optional mounting feet to secure the enclosure to a solid surface. The Chameleon 1's lid is designed with the enclosure mounting built-in. Two hole patterns (one on each corner) provide one open and one closed mounting.
The open mounting allows the enclosure to slide down over existing bolts or wing nuts (not included). The closed holes allow the enclosure to be directly mounted to a solid surface using wood or sheet metal screws (not included).
If you run your mini2440 "headless", without an LCD, a non-LCD version is also available.
The mini2440 and LCD are sold separately.
Documents
mini2440 center punch template for Chameleon 1 Baseplate (PDF)
Drill locations for all other boards (PDF)
See the Chameleon 1 Application Guide for instructions and tips on assembly and hole patterns.
If you need an enclosure or case for the Beagle Board, see Dog House for Beagle Board
